Ricoh Pro C5200 Series - Page 109

CIP Training Pro C5200 series
Adjustment Settings for Operators
Setting Items Max. Value Min. Value Step Unit
[Second Paper Motor Feed Speed] 3.0 '-(* 0.1 %
069: [Third Paper Motor Feed Speed]
Adjust the third paper feed motor's speed.
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
Setting Items Max. Value Min. Value Step Unit
[Third Paper Motor Feed Speed] 3.0 '-(* 0.1 %
071: [Bypass Tray Motor Feed Speed]
Adjust the bypass tray paper feed motor's speed.
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
Setting Items Max. Value Min. Value Step Unit
[Bypass Tray Motor Feed Speed] 3.0 '-(* 0.1 %
072: [Registration Motor Feed Speed]
Adjust the registration motor's speed.
The registration motor drives the registration roller that feeds paper to the paper transfer unit.
Use this to resolve image quality problems (such as image scaling errors or jitter
*1
).
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
If you change this setting, apply the same values to the following settings:
• 073: [First Transport Motor Feed Speed]
• 074: [Second Transport Motor Feed Speed]
• 075: [Third Transport Motor Feed Speed]
• 077: [Relay Transport Motor Feed Speed: CW]
• 078: [Relay Transport Motor Feed Speed: CCW]
• 093: [2 Sided Exit Motor Speed]