Ricoh Pro C5200 Series - Page 18

CIP Training Pro C5200 series
Adjustment Settings for Operators
No. Item Description
0805 [Paper Alignment for
Stapling: With Feed]
Adjust the travel distance of the paper edge stopper for
edge stapling when using Finisher SR5070 or Booklet
Finisher SR5080.
0806 [Number of Sheet Align for
Stapling]
Specify the number of sheets the staple unit aligns at a
time for stapling.
0807 [Punch Position: Across
Feed]
Adjust the vertical position of the punch holes when using
Finisher SR5070 or Booklet Finisher SR5080.
0808 [Punch Position: With Feed] Adjust the horizontal position of the punch holes when
using Finisher SR5070 or Booklet Finisher SR5080.
0809 [Correct Punch Skew] Specify whether or not to enable punch skew correction
when using Finisher SR5070 or Booklet Finisher
SR5080.
0810 [Punch Skew Correction] Adjust the amount of skew correction for punching when
using Finisher SR5070 or Booklet Finisher SR5080.
0811 [Paper Alignment in Shift
Tray Setting]
Specify the accuracy of printed paper alignment when
Ziierbg`lab_m'lhkmbg`pbma@bgbla^kML/*1*hk<hhde^m
Finisher SR5080.
0812 [Paper Alignment in Shift
Tray: Across Feed]
Adjust the width of the paper alignment jogger in the shift
tray when using Finisher SR5070 or Booklet Finisher
SR5080.
0813 [Output Tray Descending
Position]
Specify the descending position for the finisher shift tray
when paper is delivered to it using Finisher SR5070 or
Booklet Finisher SR5080.
0814 [Exit Guide Close Timing:
Booklet Fin]
Specify when to close the exit guide after paper is
delivered to the finisher shift tray of Finisher SR5070 or
Booklet Finisher SR5080.
0815 [Output Trail Edge Press
Setting]
Specify whether or not to press down the trailing edge of
the paper when it is delivered to the finisher shift tray of
Finisher SR5070 or Booklet Finisher SR5080.
0816 [Output Fan Setting] Specify how the shift tray fan moves when using Finisher
SR5070 or Booklet Finisher SR5080.