Ricoh Pro C5200 Series - Page 19

CIP Training Pro C5200 series
Adjustment Settings for Operators
No. Item Description
0817 [Output Fan Level] Adjust the airflow of the shift tray for fanning the sheets
when using Finisher SR5070 or Booklet Finisher
SR5080.
0818 [Staple Position for Booklet] Adjust the horizontal position of the booklet staples when
using Booklet Finisher SR5080.
0819 [Folding Position for
Booklet]
Adjust the horizontal position of the folding when using
Booklet Finisher SR5080.
0820 [Paper Alignment for
Booklet: Across Feed]
Adjust the width of the staple jogger for booklets when
using Booklet Finisher SR5080.
0821 [Set Number of Folds for
Booklet]
Specify the number of booklet folds to be performed
when using Booklet Finisher SR5080.
0822 [Paper Alignment for
Booklet: With Feed]
Adjust the travel distance of the paper edge stopper for
booklets when using Booklet Finisher SR5080.
0823 UT'_he]Md^p=hkk^\mbhgW Specify how to correct skew (occurring during paper
mkZglihkm#pa^gT'_he]bg`pbmama^_he]bg`ngbm(
0824 U=hkk^\mT'_he]Md^pW ;]cnlmma^e^g`mah_la^^mlfho^]_hkT'_he]ld^p
correction.
0825 U=hkk^\mT'_he]Md^p4
Reverse]
Adjust how much the registration roller rotates in reverse
_hkT'_he]ld^p\hkk^\mbhg(
0826 [Maximum No. Stacked
Sheets in Output Tray]
Specify the amount of paper stacked in Finisher SR5070
or Booklet Finisher SR5080.
[Finishing: Fold]
For details about the following items, see page 80 "[Finishing: Fold]".
Qa^gnlbg`\nlmhfiZi^k&l^mmbg`l_hkUT'_he]Jhlbmbhg+WhkUT'_he]Jhlbmbhg,Wbgma^U;]oZg\^]
Settings] for custom paper are prioritized.
No. Item Description
0601 UBZe_@he]Jhlbmbhg4Gnemb'
sheet Fold]
Adjust the fold position of half folded sheets when using
ma^fnemb'_he]bg`ngbm(
0602 UF^mm^k@he]'hnmJhlbmbhg+4
Gnemb'la^^m@he]W
Adjust the fold position for the bottom segment of letter
_he]'hnmla^^mlpa^gnlbg`ma^fnemb'_he]bg`ngbm(