Ricoh Pro C5200 Series - Page 39

CIP Training Pro C5200 series
Adjustment Settings for Operators
By increasing the airflow, you can reduce multiple feeding and paper jams when printing on coated or
thick paper.
Jk^llU%Wmhbg\k^Zl^ma^Zbk_ehp&hkUƽWmh]^\k^Zl^(
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 3] 70 100 10 10 %
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Wide LCT: Fan Level] in [Advanced Settings] takes precedence.
0109: [Wide LCT: Fan Timer]
Adjust the duration of the airflow of the wide LCT for fanning the sheets.
The wide LCT (Trays 3 to 5) fans sheets by blowing air between the sheets before feeding them.
By increasing the duration of the airflow, you can reduce multiple feeding and paper jams when printing
on coated or thick paper.
Jk^llU%Wmhbg\k^Zl^ma^]nkZmbhgh_ma^Zbk_ehphkUƽWmh]^\k^Zl^bm(
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 3] 3 10 1 1 second(s)
• Increasing the duration of the airflow may reduce throughput.
0110: [Pickup Assist]
Specify the paper feed roller movement.
If the paper feed roller fails to pick up slippery paper such as coated paper, and misfeeding of paper
occurs, set this to [On].
Setting Items Values Default Value
[Tray 3] [Auto Select]
[On]
[Off]
[Auto Select]