Ricoh Pro C5200 Series - [Finishing: Finisher]

CIP Training Pro C5200 series
Adjustment Settings for Operators
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Pickup Assist Setting] in [Advanced Settings] takes precedence.
[Finishing: Finisher]
0401: [Punch Position: With Feed]
Adjust the horizontal position of the punch holes when using Finisher SR4120 or Finisher SR4130.
Jk^llU%Wmhfho^ma^ihlbmbhgmhpZk]ma^mhi^]`^"e^_m#k^eZmbo^mhma^iZi^k_^^]]bk^\mbhg&hkUƽWmh
move it toward the bottom edge (right).
Paper feed direction
Paper feed direction
2 Holes Top
2 Holes Left
CDS026
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[2 Holes Type JP / EU] 0.0 2.0 ',(* 0.4 mm
[3 Holes Type US]
[4 Holes Type EU]
[4 Holes Type NE]
[2 Holes Type US]
[1 Hole Type JP]
0402: [Punch Position: Across Feed]
Adjust the vertical position of the punch holes when using Finisher SR4120 or Finisher SR4130.
Jk^llU%Wmhfho^ma^ihlbmbhg_hkpZk]"ni#&hkUƽWmhfho^bm[Z\dpZk]"]hpg#(