Ricoh Pro C5200 Series - Page 97

CIP Training Pro C5200 series
Adjustment Settings for Operators
No. Item Description
037 [Ppr Trns CV: Start Timing:
BW: Side 1]
Adjust the timing to start the constant voltage control for
the bias during paper transfer when printing in each print
fh]^"\hehk)[eZ\d'Zg]'pabm^&hg^'lb]^)]nie^q#(
038 [Ppr Trns CV: Start Timing:
BW: Side 2]
041 [Ppr Trns CV: Start Timing:
FC: Side 1]
042 [Ppr Trns CV: Start Timing:
FC: Side 2]
039 [Ppr Trns CV: Duration:
BW: Side 1]
Adjust the duration of the constant voltage control for the
bias during paper transfer when printing in each print
fh]^"\hehk)[eZ\d'Zg]'pabm^&hg^'lb]^)]nie^q#(
040 [Ppr Trns CV: Duration:
BW: Side 2]
043 [Ppr Trns CV: Duration: FC:
Side 1]
044 [Ppr Trns CV: Duration: FC:
Side 2]
045 [Ppr Trns Contact Mode] Specify whether or not to enable the paper transfer
contact/separation mode.
046 [Ppr Trns Gap: On Timing] Adjust the timing for the intermediate transfer belt and the
paper transfer unit to come into contact during paper
contact/ separation.
047 [Ppr Trns Gap: Off Timing] Adjust the timing for the intermediate transfer belt and the
paper transfer unit to separate during paper contact/
separation.
032 UN^qmnk^]JZi^kGh]^W Mi^\b_rpa^ma^khkghmmh^gZ[e^N^qmnk^]JZi^kfh]^(