How to fix frequent misfeeds on Ricoh Pro C5210s Printer due to tray settings?
If you're experiencing frequent misfeeds on your Ricoh Printer, it could be because the tray's side or end fences are not set properly. Remove the misfed paper and check that the side or end fences are set correctly and that the side fences are locked.
Why does my Ricoh Pro C5210s Printer have frequent misfeeds because of finisher tray?
If your Ricoh Printer is experiencing frequent misfeeds, it could be due to a foreign object on the finisher tray. Remove the misfed paper and ensure that nothing is placed on the finisher tray.
How to resolve frequent misfeeds on Ricoh Pro C5210s Printer due to staple cartridge?
If your Ricoh Printer is experiencing frequent misfeeds, it could be due to the staple cartridge not being set correctly. Set the staple cartridge properly.
What to do if my Ricoh Pro C5210s Printer shows an error message?
If your Ricoh Printer is showing an error, it may be because a function with the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] in the function where the error occurred, read the displayed message, and take the appropriate action.
Why does my Ricoh Pro C5210s misfeed when printing envelopes?
If misfeeds occur when printing to envelopes on your Ricoh Printer, it's likely that the envelopes are curled. Make sure you fully flatten curled envelopes before you load them. Do not stack envelopes over the specified limit for the paper tray. If misfeeds still occur after the envelopes have been flattened, load envelopes on the tray one at a time and print them individually.
How to prevent Ricoh Pro C5210s misfeeds caused by curled paper?
If misfeeds occur frequently on your Ricoh Printer, it may be due to curled paper, which can cause misfeeds, soiled paper edges, or slipped positions while performing staple or stack printing. Flatten the paper with your hands to straighten out the curl. Load the paper upside down so that the curled edges face downward. Place the cut paper on a flat surface to prevent it from curling, and do not lean it against the wall.
How to prevent paper from bending when ejected from my Ricoh Pro C5210s?
If paper is bent when it is ejected from the finisher upper tray of your Ricoh Printer, change the output tray to the finisher shift tray.
How to fix print image position on my Ricoh Pro C5210s Printer?
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
Why is the print image misaligned on my Ricoh Pro C5210s?
If the print image is not properly positioned on the paper with your Ricoh Printer, no direct solution is available.
How to avoid wrinkling when folding large paper on my Ricoh Printer?
If wrinkling occurs when gate fold, letter fold-in, or letter fold-out is applied on your Ricoh Printer, it can occur if these folds are applied to B4 JIS, A3, 8 1/ " 14", 2 11" 17", 12" 18", 8K, or larger sizes of paper. When applying these folds to paper larger than A4, it is recommended to enable image reduction and use paper no larger than A4.
General| Print Speed (Color) | 65 ppm |
|---|---|
| Print Speed (Black & White) | 65 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 300, 000 pages |
| Operating System Compatibility | Windows, macOS, Linux |
| First Print Speed (Black) | 5.5 seconds |
| First Print Speed (Color) | 6.5 seconds |
| Print Technology | Laser |
| Connectivity | Ethernet, Wi-Fi |
| Maximum Paper Size | 13 x 19.2 inches |
| Print Speed (A4) | 65 ppm |
To Next Page
