Changing the Paper Size in the Paper Trays
Important
• If a paper tray is pushed vigorously when putting it back into place, the position of the
tray's side fences may slip out of place.
• Do not stack paper over the limit mark.
• Check the paper edges are aligned with the right side.
• Slide the side fences until they are aligned with the paper size, and then re-lock the side
fences.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Remove paper if loaded.
3. Release the lock on the side fences.
4. While pressing down the release lever, slide the side fences until they are aligned with
the paper size you want to load.
To Next Page
Loading...
