Ricoh Pro C651EX - Page 150

Protocol Port Setting Method When Disabled
SNMPv1,v2 UDP: 161
• Web Image Monitor
• telnet
Functions that require
SNMPv1, v2 cannot be
used.
Using the control panel,
Web Image Monitor or
telnet, you can specify
that SNMPv1, v2
settings are read-only,
and cannot be edited.
SNMPv3 UDP: 161
• Web Image Monitor
• telnet
Functions that require
SNMPv3 cannot be
used.
You can also make
settings to require
SNMPv3 encrypted
transmission and restrict
the use of other
transmission methods
using the control panel,
Web Image Monitor, or
telnet.
RSH/RCP TCP: 514
• Web Image Monitor
• telnet
Functions that require
RSH and network
TWAIN functions
cannot be used.
You can restrict
personal information
from being displayed by
making settings on the
control panel using
"Restrict Display of User
Information".
SSDP UDP: 1900
• Web Image Monitor
• telnet
Device discovery using
UPnP from Windows
cannot be used.
Bonjour UDP: 5353
• Web Image Monitor
• telnet
Bonjour functions
cannot be used.
7. Enhanced Network Security
148
7