To Next PageTo Next PageWhy Ricoh Copier doesn't enter Sleep mode when pressing the [Energy Saver] key?
In some cases, the Ricoh Copier does not enter Sleep mode when the [Energy Saver] key is pressed. Before you press the [Energy Saver] key, check that Sleep mode can be enabled.
Why does my Ricoh Copier misfeed when printing on envelopes?
If your Ricoh Copier misfeeds when printing to envelopes, the envelopes may be curled. Make sure you fully flatten curled envelopes before you load them. Do not stack envelopes over the specified limit for the paper tray. If misfeeds still occur after the envelopes have been flattened, load envelopes on the tray one at a time and print them individually. Also, if you printed envelopes with a non-rectangular flap when [Skew Detection] was set to [On], make sure you set [Skew Detection] to [Off] when printing envelopes with a non-rectangular flap.
Why does the user code entry screen appear on my Ricoh Copier?
The user code entry screen is displayed on your Ricoh Copier because users are restricted by User Code Authentication.
General| Print Technology | Laser |
|---|---|
| Color Print Speed (A4) | 71 ppm |
| Black Print Speed (A4) | 71 ppm |
| Print Speed (Color) | 71 ppm |
| Print Speed (Black) | 71 ppm |
| Maximum Print Resolution | 1200 x 4800 dpi |
| Monthly Duty Cycle | 300, 000 pages |
| Maximum Paper Size | 330.2 x 487.7 mm |
| Connectivity | Ethernet, USB, Wi-Fi |
| Paper Weight | 52 - 300 gsm |
| Duplex Printing | Standard |
