Ricoh PRO C7200S - Loading Paper

1.SC Codes
168
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Resolve the mechanical failure for the shift jogger mechanism.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-
74
B
Shift Jogger Fence Retract Motor Error
 When the output jogger retraction unit moved to the home position, home
position was not detected within specified number of pulses. (The first time:
jam display, the second time: SC)
 When the output jogger retraction unit moved from home position, home
position was still detected after specified number of pulses. (The first time:
jam display, the second time: SC)
 Motor defective
 Connecter disconnected
 Overload
 Home position sensor defective
 Replace the Shift Jogger Fence Retract Motor, reconnect the connector.
 Replace the Shift Jogger Retract HP Sensor, reconnect the connector.
 Replace the harnesses.
 Replace the Main Board.
 Resolve the mechanical failure for the shift jogger mechanism.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-
75
B
Drag Roller Movement Motor Error
 When drag roller unit moved to the home position, home position was not
detected within specified number of pulses. (The first time: jam display, the
second time: SC)
 When the drag roller unit moved from the home position, home position was
still detected after specified number of pulses. (The first time: jam display, the
second time: SC)
 Motor defective
 Connecter disconnected
 Overload
 Home position sensor defective
 Replace the Drag Roller Movement Motor, reconnect the connector.
 Replace the Drag Roller HP Sensor, reconnect the connector.
 Replace the harnesses.
 Replace the Main Board.
 Resolve the mechanical failure for the shift jogger mechanism.