1. In [Advanced Settings] for the custom paper you are using, select 1101: [Image Position],
and then select [Across Feed] of [Image Position: Side 1].
2. Adjust the image data position.
• After performing the solution, it is recommended to perform the color calibration of the external
controller.
Unprinted: Around Clear-toner Images
Colorless spots appear around clear-toner images.
Normal
Unprinted
Cause:
This may occur if:
• When printing in full color including the clear toner and the special color is set to high quality/
printing in full color including the white toner
• If there is an image using cyan, magenta, yellow, or black toner around clear-toner images.
• Slippery paper is used
Unprinted
113
To Next Page
Loading...
