Stained Paper Edges (2)
Cause:
The antistatic brushes in the exit transport and invert transport of the drawer are stained or the anti-static
brushes in Finisher SR5050/SR5060 are stained.
Solution:
For details about cleaning, see page 248 "Cleaning the Paper Feed Path".
Stained Paper Edges (3)
120 mm
(4.8 in.)
40 mm
(1.6 in.)
CNT014
Cause:
The paper feed speed of the decurler unit is too high.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
7. Image Quality Problem: Full Page
186
To Next Page
Loading...
