• After performing the solution, it is recommended to perform the color calibration of the external
controller.
• Performing procedure (b) will decrease throughput.
Uneven Gloss: Partly
Uneven glossiness occurs partly.
278 mm
(10.9 in.)
278 mm
(10.9 in.)
DXT868
Cause:
The fusing belt is stained by the toner wax.
Solution:
1. In the [Machine: Maintenance] group on the [Adjustment Settings for Operators] menu,
select 0508: [Manually Smooth Fusing Belt].
2. Execute [Uneven Gloss: Short Time].
3. Print the image. Has the problem been resolved?
Yes Finished!
No Contact your service representative.
Uneven Gloss: Wavy
When performing duplex printing on thin coated paper, wavy uneven glossiness occurs on side 1.
7. Image Quality Problem: Full Page
158
To Next Page
Loading...
