2. Print 10 or more A4 sheets. Has the problem been resolved?
Yes Go to the next step.
No Repeat Steps 1 to 2. If the problem persists, contact your service representative.
3. Is the toner fusibility within the permissible range?
Yes Finished!
No Contact your service representative.
• After performing the solution, it is recommended to perform the color calibration of the external
controller.
• Check the toner fusibility as follows:
• The printed image does not come off.
• The toner does not come off even if it is lightly rubbed by a nail.
• The toner does not come off even if it is rubbed by the cloth for cleaning the contact glass.
Lateral Hazing
Voids appear on the left and right of the paper.
Cause:
When an unfused image makes contact while on the feed path, the toner may be dispersed.
7. Image Quality Problem: Full Page
160
To Next Page
Loading...
