Paper feed direction
Original
Output
CEZ528
The paper has creased and no print appears where the crease has occurred.
Paper feed direction
Output
Original
CEZ529
Cause:
The paper feed speed of the transfer timing roller is too high.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solution:
Decrease the feed speed of the transfer timing roller.
1. In [Advanced Settings] for the custom paper you are using, select 1341: [Motor Speed]
and reduce the value in [Transfer Timing Roller] by 0.1%.
2. Print the image. Has the problem been resolved?
Yes Finished!
Disturbed Image
195
To Next Page
Loading...
