Vertical Black (color) Streaks (3)
A streak appears in parallel to the paper feed direction. This may occur on half-tone images.
Cause:
There is a trace (streak) of the paper edge on the fusing belt.
Solution:
1. In the [Machine: Maintenance] group on the [Adjustment Settings for Operators] menu,
select 0508: [Manually Smooth Fusing Belt], and then execute [Belt Scratches].
2. Print the image. Has the problem been resolved?
Yes Finished!
No Repeat Steps 1 to 2. If the problem persists, contact your service representative.
Vertical Black Streaks Occur after [Density Difference Printing: Across Feed] is
Executed
Black streaks appear on executing 10: [Density Difference Printing: Across Feed] in [Adjustment Settings
for Operators].
Streaks
53
To Next Page
Loading...
