7. Clean the sheet-through exposure glasses.
Using the dry cloth for cleaning the contact glass, wipe from the rear to front part to remove any
fragments.
8. Close the cover D3.
9. Push the left drawer slowly into the machine until it stops.
10. Pull up the lever C1.
11. Close the front covers.
12. Turn on the main power.
13. In the [Adjustment Settings for Operators] menu, execute 10: [Density Difference Printing:
Across Feed].
Vertical White Streaks (1)
A white streak appears from the leading edge to trailing edge of the paper in parallel to the paper feed
direction.
5. Image Quality Problem: Lines
56
To Next Page
Loading...
