media using the [Origin Setting] menu, eliminate the ripples, and then send the RIP data to start
printing.
1. Set media.
For details, see page 50 "Setting Media".
2. Check the heater temperature on the display panel.
3. Press [Heater Setting] to adjust the temperature as required.
For details about adjusting the heater temperature, see page 81 "Adjusting the Heater
Temperature".
4. Send the RIP data to be printed from a computer.
• When data has been received from a computer, the Data In indicator of the machine flashes.
• For details about sending RIP data from a computer, see "Functions on the Main Menu", RIP
Settings Guide.
5. Press the [Off Line/On Line] key on the control panel to set the status to online.
"Ready" is displayed on the home screen. Start printing.
Interrupt or Abort Printing
When you interrupt or abort ongoing printing jobs, perform the following operations.
2. Basic Operations
102
To Next Page
Loading...
