Ricoh Pro L5130 - Using Web Image Monitor

Using Web Image Monitor
Using Web Image Monitor, you can check the machine status and change settings.
Available operations
The following operations can be remotely performed using Web Image Monitor from a client
computer.
• Displaying machine status or settings
• Making machine settings
• Making network protocol settings
• Making security settings
• Making call service settings
Configuring the machine
To perform the operations from Web Image Monitor, TCP/IP is required. After the machine is
configured to use TCP/IP, operations from Web Image Monitor become available.
Recommended web browser
• Windows:
Internet Explorer 11.0 or later
Microsoft Edge 25 or later
Firefox 43.0 or later
Google Chrome Version 63.0 or later
• OS X:
Safari 9.0 or later
Firefox 54.0 or later
Google Chrome Version 59.0 or later
• Display and operation problems can occur if you do not enable JavaScript and cookies, or if you
are using a non-recommended web browser.
• If you are using a proxy server, change the web browser settings so that the connection to this
machine does not use the proxy server. Contact your administrator for information about the
settings.
• If you click your browser's back button but the previous page does not appear, click the browser's
refresh button and try again.
• Machine information is not automatically updated. To perform an update, click [Update] in the
display area.
• When you are using Firefox, fonts and colors may be different, or tables may be out of shape.
Using Web Image Monitor
155