2. Cut the nozzle check pattern.
For details about how to cut media, see page 104 "Cutting Media".
3. Check for clogged nozzles based on the printing result of the nozzle check pattern.
For details about how to check the print head, nozzle column, and nozzle number, see page 86
"How to Read the Printing Result ".
4. Press the [Maintenance] key.
5. Press [ ].
6. Press [Clogged Nozzle Settings].
7. Press [Registering Clogged Nozzle].
8. Select the print head that you checked in Step 3.
9. Select the nozzle column that you checked in Step 3.
If you want to register the nozzle A column of Head 1, select [H1-A Register].
10. Select the registration number.
You can register up to 10 clogged nozzles to one nozzle column.
You can display the next page using [
] or [ ].
Recovering the Clogged Nozzle by Compensating with Another Nozzle
117
To Next Page
Loading...
