• Off
Default: [On]
Valid Protocol
Select protocols to use in the network.
• IPv4: Active/Inactive
• IPv6: Active/Inactive
Default:
• IPv4: [Active]
• IPv6: [Inactive]
DNS
Make settings for the DNS server.
Enter the DNS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).
• DNS Server 1: 0.0.0.0
• DNS Server 2: 0.0.0.0
• DNS
Check the setting values of the DNS server.
• DNS Server 1 (DHCP)
• DNS Server 2 (DHCP)
• DNS Server 1
• DNS Server 2
Printing Timeout Time
The printing process automatically times out when the machine cannot receive print data from a
computer for a specified period because the network is disconnected while receiving the data. You
can specify how many seconds the machine should wait before a printing timeout occurs.
Default: [300 second(s)]
The printing timeout time can be set from 5 to 65535 seconds, using the number keys.
MAC Address
Display the physical address (MAC address).
Ethernet Speed
Set the access speed for networks. Select a speed that matches your network environment. [Auto
selection] should usually be selected.
• Auto selection
• 100 Mbps Full Duplex
• 100 Mbps Half Duplex
List of Setting Items
141
To Next Page
Loading...
