Ricoh Pro L5130 - Page 96

EDP012
0
+10
+30
-70
-30
-10
0
+10
+30
+70
1. If the horizontal line for "+10" is the straightest, the adjustment value is +10.
+10
0
+10
EDP017
If the lines for "0" and "+10" are oblique contrariwise, the adjustment value is between 0 and
+10.
2. If the obliqueness of "+10" and "0" is the same, the adjustment value is +5.
+10
0
+
EDP018
3. If the obliqueness of "+10" is greater than 0, the adjustment value is between +1 and +4.
(Enter "+3" for 3.)
+10
0
+
EDP019
After completing the adjustment, perform media feed adjustment again and check that the
adjustment value has been set correctly.
2. Basic Operations
94