6. Apply cleaning liquid to a cleaning stick, and then use it to wipe off any dirt on the caps
and their surrounding areas.
• If ink adheres strongly to the edge of the cap, make sure to remove it. Do not wipe off ink
using excessive force. Otherwise the edge of the cap might deform.
• If there is any ink dirt around the caps, wipe the dirt off.
• Wipe off completely so that no cleaning liquid remains.
1. Edge of the cap
2. Around the cap
7. After cleaning, confirm that the mesh on the cap has not come off.
If the mesh comes off, push in the cap.
Cleaning Each Time You Replace the Nozzle Cleaning Cartridge
19
To Next Page
Loading...
