1. Nozzle faces
8. When dust is built up in the surface of the media sensor on the underside of the carriage,
wipe off the dirt with a cotton swab, etc.
1. Colorimetric sensor
2. Media sensor
Do not touch the colorimetric sensor as cleaning may cause the sensor to become misaligned.
9. Use the two screws removed in Step 6 to fix the left cover.
10. Raise the lock lever located inside of the right cover on the left, and then close the right
cover.
The carriage moves to the home position.
2. Daily Care and Maintenance
24
To Next Page
Loading...
