1. Press the [Maintenance] key.
2. Press [Head Cleaning Maintenance].
3. Press [Left Side Edge Position].
4. Press [Execute].
The carriage moves to the left side edge position and a completion of movement message is
displayed.
5. After the message is displayed, remove the two fixed screws, and then remove the left
cover.
The removed screws will be used when refixing the cover.
6. Soak a paper towel or non-woven fabric with cleaning liquid, and then gently wipe the
nozzle faces of the print heads.
The nozzle faces should only be wiped gently so that they are soaked in cleaning liquid. Do not
strongly rub the nozzles faces.
2. Daily Care and Maintenance
32
To Next Page
Loading...
