Ricoh Pro L5160 - When You Do Not Know How to Set the Print Settings; Head Height

When you do not know how to set the print settings
31
When you do not know how to set the
print settings
Head height
We recommend that the default settings are best for good image quality.
Change the setting to higher only if a media jam occurs or the print head rubs the media.
Adjust the drop position again after changing the setting to prevent the abnormal image.
setting
Head height(mm)
Head height (inches)
default
1.8 mm
0.07 inches
+1
2.3mm
0.09 inches
+2
2.8mm
0.11 inches
+3
3.8mm
0.15 inches