22
Installing the Waste Ink Bottle and Ink Cartridges
1. Thread the tube through until it stops at the position of the stopper on the inner side of the
waste ink bottle cap.
2. Close the lid.
The waste ink bottle shown in the picture above might be slightly different than the actual waste
ink bottle included with the product.
3. Remove the tape and towel from the waste ink bottle connector, and then connect the two
waste ink tubes to the waste ink bottle connectors on the right back side of the printer.
NOTE - Push the tube all the way through until it stops. Otherwise, the waste ink may clog, causing a
malfunction.
To Next Page
Loading...
