Ricoh Ri 2000 - Handling Power Cord and Power Plugs

7
• Keep people other than operators away from the machine. Otherwise, their hands or fingers may be
caught in the gap and injury may result.
• Use at an altitude of 2,500 m or less. There is a possibility of electric shock, electric leakage, fire if it
is used in an environment exceeding 2,500 m altitude.
Handling power cord and power plugs
• Do not use any power sources other than those that match the specifications shown in this manual.
Doing so may result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so may result
in fire or electric shock.
• Do not use multi-socket adaptors. Doing so may result in fire or electric shock.
• Do not use extension cords. Doing so may result in fire or electric shock.
• Do not use a power cord that has been damaged, broken, or modified. Also, do not use a power cord
that has been trapped under heavy objects, pulled hard, or bent severely. Doing so may result in fire
or electric shock.
• It is dangerous to handle the power cord plug with wet hands. Doing so may result in electric shock.
• Touching the pins of the power plug with anything metallic constitutes a fire and electric shock
hazard.
• The supplied power cord is for use with this machine only. Do not use it with other appliances. Doing
so may result in fire or electric shock.
•
If the power cord is damaged and its inner wires are exposed or broken, contact your service
representative for a replacement. Use of damaged power cords may result in fire or electric shock.