24
5. Agitating new white cartridges
For details about agitating a new white cartridge, see page 31, “Agitating a New White
Cartridge”.
6. Insert the ink cartridges.
IMPORTANT!
When installing the ink cartridges, do not touch the inside of the machine.
Carefully install a cartridge in the correct position.
During the initial ink charging, do not lift the front cover or cartridge cover.
During the initial ink charge, if you lift the cover, the procedure will pause. To resume, hold
the power button down to reboot the printer.
Agitate all the white cartridges before inserting them into the printer, and then begin the fill
process.
For white ink, insert two W1 and W2 ink cartridges.
You can insert each ink cartridge into either of the designated slots.
NOTE - Push the cartridges all the way through until they stop.
Be sure not to insert cleaning cartridges. The cleaning cartridges have the following labels
affixed to them:
Supply the ink as follows:
To Next Page
Loading...
