Paper Transfer
Transfer Roller
1. Front cover ( p.23)
2. Remove the AIO.
3. Remove the transfer roller [A] (Bushing x 1, spring x 2, gear x 1) as shown above.
• Do not touch the transfer roller surface, when reinstalling the new transfer roller.
After installing a new transfer roller
1. Enter the "Maintenance Mode".
2. Select "Engine Maintenance", and then press "OK" key.
3.
Select "Reset Transfer Roller Life" and then press "OK" key.
4. Select "Execute" and then press "OK" key.
Paper Transfer
63
To Next Page
Loading...
