Image Adjustment
Registration Adjustment
User Adjustment
The paper registration can also be adjusted with the user mode ("Engine Maintenance Registration"). For
details, see the "User Guide".
Service Adjustment
1. Print the test page ( p.124).
• Print out the test pattern before changing the paper registration setting.
2. Enter the "Maintenance Mode".
3. Select "Engine Maintenance", and then press "OK" key.
4. Select the "Registration", and then press "OK" key.
(1): Feed Direction
(2): Vertical Adjustment
(3): Horizontal Adjustment
(4): Print Area
5. Press the "Up" or "Down" keys to set the registration value (mm).
Image Adjustment
85
To Next Page
Loading...
