Ricoh RN-MF1 - Page 97

Engine Maintenance
Fusing Unit
Temperature
Thin Paper
Adjusts the fusing temperature for thin paper.
[140 to 165 / 150 (Default) / 5°C/step]
Envelope
Adjusts the fusing temperature for envelope.
[170 to 200 / 200 (Default) / 5°C/step]
Postcard
Adjusts the fusing temperature for postcard.
[160 to 200 / 185 (Default) / 5°C/step]
Recycled
Adjusts the fusing temperature for recycled paper.
[150 to 180 / 160 (Default) / 5°C/step]
Charge Bias
Adjusts the charge bias.
[1100 to 1300 / 1200 / 20 /step]
Developer Bias
Adjusts the developer bias.
[270 to 330 / 300 / 15 /step]
Trans. Roller Bias
Adjusts the transfer roller bias.
[-6 to 6 / 0 / 1 /step]
Subscan
Magnification
Adjusts the sub scan magnification.
[-8 to 8 / 0 / 1 /step]
Toner Near End
To Toner End
Sheets
Adjusts the printable sheets between "toner near end" to
"toner end".
[0 to 255 / 200 / 1 sheet/step]
Dot Count
Adjusts the printable dot count between "toner near end"
to "toner end".
[0 to 255 / 100 / 1 dot/step]
Service Program Mode
95
5