Ricoh SP 1200S - Using the Scanner Glass

Chapter 2
16
a Fold out the ADF document output
support flap (1) and the ADF support
flap (2).
Note
For legal paper, close the ADF document
output support flap (1), and then take each
individual sheet off the ADF output tray
after scanning.
b Fan the pages well.
c Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller.
d Adjust the paper guides (1) to fit the
width of your document.
Using the scanner glass 2
You can use the scanner glass to copy or
scan pages of a book or one page at a time.
Documents can be up to 215.9 mm wide and
297 mm long.
Note
To use the scanner glass, the ADF must
be empty.
a Lift the document cover.
b Using the document guidelines on the
left, centre the document face down on
the scanner glass.
c Close the document cover.
CAUTION
If the document is a book or is thick do not
slam the cover or press on it.
2
1
1