Ricoh SP 1200S - Sorting Copies Using the ADF; Making N in 1 Copies

Chapter 4
26
To change the default setting, follow the
steps below:
a Press Menu.
b Press a or b to choose 2.Copy.
Press OK.
c Press a or b to choose 1.Quality.
Press OK.
d Press a or b to choose the copy quality.
Press OK.
e Press Stop/Exit.
Sorting copies using the ADF4
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a Load your document in the ADF.
b Enter the number of copies you want.
c Press Options and a or b to choose
Stack/Sort.
Press OK.
d Press a or b to choose Sort.
Press OK.
e Press Start.
Making N in 1 copies
(page layout) 4
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
Important 4
 Please make sure the paper size is set to
Letter or A4.
 (P) means Portrait and (L) means
Landscape.
 You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a Load your document.
b Enter the number of copies you want.
c Press Options.
d Press a or b to choose Page Layout.
Press OK.
e Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) or Off(1 in 1).
Press OK.
f Press Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to g.
g After the machine scans the page,
press a to scan the next page.
Next Page?
a Yes b No
h Put the next page on the scanner glass.
Press OK.
Repeat g and h for each page of the
layout.