To Next PageTo Next PageWhy Ricoh SP 1200SF has no printout?
If your Ricoh All in One Printer isn't printing, verify that it is plugged in and turned on. Also, check if the toner cartridge and drum unit are correctly installed. Ensure the interface cable is properly connected to both the printer and your computer. Confirm that the correct printer driver is installed and selected. Check the LCD for any error messages and ensure the printer is online.
What to do if Ricoh All in One Printer does not load paper?
If your Ricoh All in One Printer isn't loading paper and displays 'No Paper' or a 'Paper Jam' message, first, load a new stack of paper if the tray is empty. If there's paper, ensure it's straight. Try removing the paper, turning the stack over, and placing it back. Reduce the amount of paper in the tray.
How to fix light printouts on Ricoh All in One Printer?
If printouts from your Ricoh All in One Printer are too light, and this occurs when making copies or printing received faxes, turn off Toner Save mode in the machine menu settings. You can also disable Toner Save mode in the Advanced tab of the printer driver.
Why Ricoh All in One Printer printed pages are smeared?
Smeared printouts from your Ricoh All in One Printer could be due to an incorrect Paper Type setting or using print media that is too thick or has a rough surface.
Why Ricoh All in One Printer prints first pages correctly, then text missing?
If your Ricoh All in One Printer prints the first few pages correctly but then misses text on subsequent pages, check the settings in your application to ensure it is set up to work with your machine. Also, make sure that you connected the interface cable correctly, because your computer might not be recognizing the machine’s input buffer’s full signal.
What to do if Ricoh SP 1200SF 'hears' a voice as a CNG Tone?
If your Ricoh All in One Printer 'hears' a voice as a CNG Tone, and Fax Detect is on, the machine is more sensitive to sounds. Deactivate the machine by pressing Stop/Exit. You can also try turning Fax Detect off.
Which paper can I use in Ricoh SP 1200SF?
You can use plain paper, recycled paper, transparency and labels that are made for laser machines in Ricoh All in One Printer.
How to remove a line across the page on Ricoh All in One Printer?
To remove a line across the page from your Ricoh All in One Printer, clean the laser scanner window and the corona wire inside the drum unit.
How to fix faint printouts on Ricoh SP 1200SF?
Faint printouts from your Ricoh All in One Printer can be caused by environmental conditions like humidity or high temperatures. Check the machine’s environment.
How to fix black toner marks across the page on Ricoh All in One Printer?
To resolve black toner marks across the page from your Ricoh All in One Printer, ensure that you use paper that meets the specifications. If you use label sheets for laser machines, the glue from the sheets may sometimes stick to the OPC drum surface; clean the drum unit.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Speed (Black) | 22 ppm |
| Paper Capacity | 250 sheets |
| Scanner Type | Flatbed |
| Scan Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Duplex Printing | Manual |
| Connectivity | USB 2.0 |
| Fax Resolution | 200 x 200 dpi |
| Supported Operating Systems | Windows, Linux |
