Why is the printout from my Ricoh SP 203 SF All in One Printer blurred?
If the whole printout from your Ricoh All in One Printer is blurred, ensure that the paper is not damp and has been stored properly. If you have enabled [Toner Save:], printing may be less dense. If there has been a rapid change in temperature or humidity, allow the machine to acclimatize before using it.
Why is the paper curled after printing from my Ricoh SP 203 SF?
If the printed paper from your Ricoh All in One Printer is curled, try loading the paper upside down in the input tray. Also, ensure that the paper is not damp and has been stored properly.
Why is my Ricoh SP 203 SF feeding multiple sheets at once?
If multiple sheets of paper are fed at once in your Ricoh All in One Printer, try these steps: * Fan the paper well before loading, and ensure the edges are even. * Make sure the paper guides are correctly positioned. * Use supported paper types. * Do not load paper beyond the upper limit markings on the paper guide. * Only add paper when the tray is empty.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Speed (Black) | 22 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Paper Capacity | 250 sheets |
| Display | LCD |
| Duplex Printing | Manual |
| Copy Speed | 22 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| First Print Out Time | 10 seconds |
| Fax Transmission Speed | 3 seconds per page |
| Connectivity | Ethernet |
To Next Page
