Toner Saving
Sets the machine to print using a reduced amount of toner (for prints made by the copier function
only).
Default: [Off]
•
Off
• On
Supplies Status
Displays information about consumables. To replace the fusing unit, transfer roller, or paper feed
roller, contact your sales or service representative.
• Print Cart.:
Displays the remaining amount of toner.
(New), , , , ,
(Needs replacing)
•
Fusing Unit:
Displays the remaining life of the fusing unit.
(New), , , , ,
(Needs replacing)
•
Transfer Roller:
Displays the remaining life of the transfer roller.
(New), , , , ,
(Needs replacing)
•
Paper Feed Roller:
Displays the remaining life of the paper feed roller.
(New), , , , ,
(Needs replacing)
Scanner Carriage
•
Lock Scnr. Carriage
Returns the scanning unit inside the machine to its original position. Before transporting the
machine, use this function to return the scanning unit to its original position.
Press [Yes] to return the scanning unit to its original position. Press [No] to exit to the previous
level of the menu tree without returning the scanning unit to its original position.
Printer Registration
Adjust the registration of each tray if necessary. You can adjust the registration value between -15
and +15 (that is, -1.5 and +1.5 mm, in 0.1 mm increments).
Default: 0 for all parameters
System Settings
151
To Next Page
Loading...
