8. Slide the print cartridge in horizontally. When the cartridge can go no further, raise it
slightly and push it fully in. Then push down on the cartridge until it clicks into place.
9. Using both hands, carefully push up the front cover until it closes.
• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
Removing Jammed Paper from the Bypass Tray
If "Misfeed: BypassTray" appears on the display, follow the procedure below to remove it.
1. If paper is jammed in the bypass tray input area, remove the jammed paper carefully.
To Next Page
Loading...
