System Settings (When Using the Four-line LCD
Panel Model)
This function is available for SP 330SN only.
I/O Timeout
Item Description Value
USB Specifies how many seconds the
machine waits for print data, if the
data is interrupted while it is being sent
from the computer via USB. If the
machine does not receive any more
data within the time specified here, the
machine only prints the data it has
received. If printing is frequently
interrupted by data from other ports,
increase the timeout period.
• 15 sec.
• 60 sec.
• 300 sec.
Default: [60 sec.]
Network Specifies how many seconds the
machine waits for print data, if the
data is interrupted while it is being sent
from the computer via network. If the
machine does not receive any more
data within the time specified here, the
machine only prints the data it has
received. If printing is frequently
interrupted by data from other ports,
increase the timeout period.
• 15 sec.
• 60 sec.
• 300 sec.
Default: [15 sec.]
Locked Print Specifies how many seconds the
machine holds a new Locked Print file,
when the machine cannot store any
more Locked Print files. Within this
time, you can print or delete the new
Locked Print file. You can also print or
delete an existing Locked Print file so
that the new Locked Print file can be
stored in the machine.
• 0 to 300 seconds, in increments
of 1 second
Default: [60 seconds]
7. Configuring the Machine Using the Control Panel
294
To Next Page
Loading...
Need help?
General
Weight and Dimensions
