Ricoh WG-4 GPS - Turning the Camera on; Pressing the Power Button; Making the Initial Settings

13
Pressing the Power Button
The camera turns on and is ready to
take still pictures. Press the power
button again to turn the camera off.
Making the Initial Settings
The [Language/u] screen appears when the camera is turned on for the
first time. Select the desired language and then set the date and time.
Use the four-way controller (2345) to select the desired
language.
Press the 4 button. The [Initial Setting] screen appears.
If you accidentally select the wrong
language and press the 4 button,
press the four-way controller (5), use
the four-way controller (2345) to
select the desired language, and then
press the 4 button. The [Initial Setting]
screen appears in the selected language.
1
2
2
Memo
MENU
Cancel
Initial Setting
Hometown
New York
Settings complete
English
DST
OFOFFOFF
Turning the Camera On
2
2