RIDGID 975 - Table I. Standard Roll Groove Specifications

Ridge Tool Company 19
975 Combo Roll Groover
Table I. Standard Roll Groove Specifications For Pipe of IPS Dimensions
NOTE! All Dimensions are in Inches.
TA B C D
NOM. PIPE MIN. GASKET GROOVE GROOVE NOM.
PIPE DIAMETER WALL SEAT WIDTH DIAMETER GROOVE
SIZE O.D. TOL. THK. +.015/-.030 +.030/-.015 O.D. TOL. DEPTH (Ref.) (2)
1
1
/
4
1.660 +.016 .065 .625 .344 1.535 +.000 .063
-.016 -.015
1
1
/
2
1.900 +.016 .065 .625 .344 1.775 +.000 .063
-.016 -.015
2
(1)
2.375 +.024 .065 .625 .344 2.250 +.000 .063
-.016 -.015
2
1
/
2
(1)
2.875 +.029 .083 .625 .344 2.720 +.000 .078
-.016 -.015
3
(1)
3.50 +.030 .083 .625 .344 3.344 +.000 .078
-.018 -.015
3
1
/
2
(1)
4.00 +030 .083 .625 .344 3.834 +.000 .083
-.018 -.015
4
(1)
4.50 +.035 .083 .625 .344 4.334 +.000 .083
-.020 -.015
5
(1)
5.563 +.056 .109 .625 .344 5.395 +.000 .084
-.022 -.015
6
(1)
6.625 +.050 .109 .625 .344 6.455 +.000 .085
-.024 -.015
(1) As per AWWA C606-06
(2) Nominal Groove Depth is provided as a reference dimension only. Do not use groove depth to determine acceptability of a groove.
Table II. Pipe Maximum and Minimum Wall Thickness
NOTE! All Dimensions are in Inches.
CARBON STEEL OR STAINLESS STEEL
ALUMINUM PIPE OR TUBE PIPE OR TUBE PVC PIPE
Pipe Size
Wall Thickness Wall Thickness Wall Thickness
Min. Max. Min.
Max. Min. Max.
1
1
/
4
" .065 .140 .065 .140 .140 .140
1
1
/
2
" .065 .145 .065 .145 .145 .200
2" .065 .154 .065 .154 .154 .218
2
1
/
2
" .083 .203 .083 .188 .203 .276
3" .083 .216 .083 .188 .216 .300
3
1
/
2
" .083 .226 .083 .188 .226 .226
4" .083 .237 .083 .188 .237 .237
5" .109 .258 .109 .188 .258 .258
6" .109 .280 .109 .188 .280 .280
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com