Power Source ...............4 x “AA”, Alkaline or
Rechargeable
Attachments..................Hook, Magnet,
Mirror
Weight
(tool w/ batteries) ..........1.7 lbs (0.77 kg)
Standard Equipment
The micro CA-150 Inspection Camera comes
with the following items:
• micro CA-150
• 17mm Imager
• 3' RCA Cable
• Hook, Magnet, Mirror Attachments
• 4 x “AA” Batteries
Figure 1 – micro CA-150
Controls
Figure 2 – Controls
FCC Statement
This equipment has been tested and found to
device while in water increases the risk of
electrical shock.
The EC Declaration of conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required.
If you have any question concerning this
RIDGID
®
product:
– Contact your local RIDGID distributor.
– Visit RIDGID.com to find your local
RIDGID contact point.
– Contact Ridge Tool Technical Service
De part ment at rtctechservices@emer -
son.com, or in the U.S. and Canada call
(800) 519-3456.
Description,
Specifications and
Standard Equipment
Description
The micro CA-150 Inspection Camera dis-
plays live color video from an imaging sensor
and light source that’s connected to a 3' flexi-
ble cable. It can be used to look into tight
spots and beam back real-time video to a
color LCD. It comes with a 11/16" (17mm)
camera head for general use.
Specifications
Display.........................3.5" Color LCD
(320 x 240
Resolution)
Lighting........................4 Adjustable LEDs
Cable Reach................3' (1m) (30' (9m)
with Optional
Extensions)
Waterproof to 10'
(3m) (IP67)
Camera Head ..............11/16" (17mm)
Video Output ...............RCA (3' Cable
Included)
TV-Out .........................PAL/NTSC
Operating Temp ...........0° C ~ 50° C
Storage Temp ..............-20° C ~ 60° C
Storage Humidity.........15% ~ 85% RH
Depth of Field (DOF)....10mm ~ • (infinity)
Internal Memory ..........Save up to 20 im-
ages
4
micro CA-150 Inspection Camera
Rotate
Image
Power
LED
Brightness Decrease
Image
Playback
LED Brightness
Increase
Image Capture
To Next Page
Loading...
