RIDGID R4221 User Manual

To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre produit de
RIDGID, s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto de
RIDGID, por favor visita:
http://register.RIDGID.com
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
12 in. SLIDING COMPOUND MITER SAW
SCIE À ONGLETS COMBINÉS COULISSANTE
DE 305 mm (12 po)
SIERRA INGLETEADORA COMPUESTA
DESLIZANTE DE 305 mm (12 pulg.)
R4221
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Safety Rules .......................2-3
 Specific Safety Rules ......................3-4
 Symbols ..............................................5
 Electrical ............................................. 6
 Glossary of Terms ...............................7
 Features .........................................8-11
 Tools Needed ...................................12
 Loose Parts List ................................12
 Assembly .....................................13-23
 Operation .....................................24-37
 Maintenance ................................38-39
 Accessories ......................................39
 Guarantee .........................................40
 Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité générales ..........2-3
 Règles de sécurité particulières ......3-4
Symboles ............................................5
 Caractéristiques électriques ...............6
 Glossaire .............................................7
 Caractéristiques ............................8-11
Outils nécessaires ............................12
 Liste des pièces détachées ..............12
 Assemblage .................................13-23
 Utilisation .....................................24-37
 Entretien ......................................38-39
 Accessories ...................................... 39
 Garantie ............................................ 40
 Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
Reglas de seguridad generales .......2-3
Reglas de seguridad específicas ....3-4
Símbolos ............................................5
Aspectos eléctricos ............................ 6
 Glosario de términos ..........................7
Características ..............................8-11
Herramientas necesarias ..................12
 Lista de piezas sueltas .....................12
Armado ........................................13-23
Funcionamiento ...........................24-37
Mantenimiento .............................38-39
Accessorios ...................................... 39
Garantía ............................................ 40
Pedidos de piezas /
servicio .......................... Pág. posterior

RIDGID R4221 Specifications

General

Type	Table Saw
Motor Power	15 Amp
Blade Diameter	10 inches
Arbor Size	5/8 inches
Voltage	120 V
Cord Length	6 feet
Maximum Cut Depth at 90 Degrees	3-1/2 inches
Maximum Cut Depth at 45 Degrees	2-1/2 inches

Summary

GENERAL SAFETY RULES

General Safety Instructions

Essential safety guidelines for tool operation and user protection.

Specific Safety Rules

Detailed safety precautions related to specific tool operations and workpiece handling.

ASSEMBLY AND SETUP

Unpacking and Initial Assembly Steps

Mounting and Securing the Miter Saw

Installing and Adjusting Components

Steps for fitting fences, blade, clamp, and adjusting locks and detents.

Squaring the Saw Blade Alignment

Procedures for ensuring blade parallelism with the fence and miter table.

OPERATION GUIDELINES

General Operation Warnings and Applications

Basic Cutting Procedures (Slide, Miter, Bevel)

Step-by-step guides for performing common cutting operations.

Advanced Cutting Techniques and Settings

Instructions for compound, crown molding, dado cuts, and warped material, plus settings.

Workpiece Support and Clamping

MAINTENANCE AND ACCESSORIES

Brush Replacement Procedure

WARRANTY AND SERVICE

Warranty Coverage and Guarantee Policy

Obtaining Service and Exclusions