METHOD 3 - PEDESTAL MOUNT
Secure the MOU2,,!T1NGFLANGE to MOUE'qT1NGPEDESTAL using the hardware provided with the pedestal.
Secure burner to MOU2,,!T1NGFLANGE as in METHOD 1,item A, C and D.
NOTE: It is suggested that the pedestal be anchored in position on the floor by installing brackets over the
pedestal tube and securing brackets to the floor.
WARNING: WHEN THE COMBUSTION CHAMBER IS LINED WITH A
REFRACTORY MATERIAL, IT IS IMPERATIVE THAT THE END CONE NOT
PROTRUDE INTO THE CHAMBER AREA, AS EXCESSIVE HEAT AT BURNER
SHUT DOWN MAY DAMAGE THE END CONE.
INTERNAL FACTORY WIRING
RIELLO 40 F SERIES OIL BURNERS EQUIPPED
WITH AN ELECTRONIC AIR SHUTTER
INTERNAL FACTORY WIRING
PUMP VALVE
(COIL)
A-
D
I--
C
D
aK
CAPA(ITOR
r-tl--
SEE FIELD ___
WIRING
LEGEND:
(A) BROWN
(B) WHITE
(C) BLUE
(D) BLACK
(6) 120V SOURCE ACTIVATES SHUTTER OPEN
(11) MOTOR LEAD 120V SOURCE
(®) 120V CONTROL LOCK OUT ALARM TERMINAL
(AUX) CONSTANT 120V AUXILIARY TERMINAL - ELECTRONIC AIR SHUTTER
Standard 40 F3-F5 I-O manual Rev4 l.doc Page 8 of 8
To Next Page
Loading...
