To Next PageTo Next Page
Need help?Do you have a question about the Riello 40 FS20 and is the answer not in the manual?
Details the thermal output range in kW and kcal/h.
Specifies the gas type (Family 2) compatibility and pressure.
Outlines the single-phase electrical supply requirements.
Lists gas categories for different countries (FR, GB, DE, etc.).
Information on CE marking and relevant directives.
Provides installation notes regarding grommet and cover screws.
Provides dimensional data for the burner flange.
Details the overall dimensions of the burner unit.
Lists the quantity and description of supplied equipment.
Instructions for mounting the burner assembly to the boiler.
Diagram illustrating the hinge assembly process.
Graph showing combustion chamber pressure versus burner output.
Graph illustrating burner output in kW and kcal/h.
Defines testing standards for the burner.
Advice on matching the burner to commercial boilers.
Graph correlating gas pressure to burner output.
Details gas train connections, types, and employments.
Instructions for correctly positioning the electrode and probe.
Diagram showing connections to the control box 508 SE.
Details the wiring for the 6-pole socket.
Details the wiring for the 7-pole socket.
Wiring diagram for connecting the motor.
Wiring diagram for connecting the capacitor.
Installer wiring diagram for the 6-pin plug.
Installer wiring diagram for the 7-pin plug.
Important notes for installer wiring, including phase/neutral and earth.
Illustrates normal and lock-out start-up sequences.
Example demonstrating combustion head adjustment with a graph.
Procedure for air evacuation during burner starting.
Formula and example for calculating corrected gas output.
Table for setting combustion parameters based on gas type.
Procedure for measuring the ionization current.
Instructions for setting the air pressure switch.
Crucial note on air pressure switch function related to CO levels.
Lists common problems encountered during burner start-up.
Provides potential causes for burner starting difficulties.
Notes on additional checks for persistent starting issues.
Summarizes common operating faults and their reasons.
Instructions for safely stopping the burner and ensuring natural draught.
Ensuring adequate air passage for combustion.
Checking air-input openings for proper air exchange.
Requirement to follow regulations for installation and maintenance.
General
