EasyManua.ls Logo

Riello 40 FS20 - WARNINGS FOR COMBUSTION; Burner Stop Procedure; Combustion Air Requirements; Air-Input Opening Check

Riello 40 FS20
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2056
10
GB
WARNINGS TO AVOID BURNOUT OR BAD COMBUSTION OF
THE BURNER
1When the burner is stopped, the smoke pipe must be opened and effect a natural
draught in the combustion chamber. If the smoke pipe is closed, the burner must
be drawn back till the extraction of blast tube from the furnace. Before operating in
this way take the voltage off.
2The place, where the burner works, must have same openings suitable for the passage
of air necessary for combustion. To be sure about this, you have to control CO
2
and CO in the exhaust gases with all the windows and doors closed.
3If in the place, where the burner works, there are air-breathings, check the existence
of air-input openings with dimensions suitable for the necessary air-exchange. In
any case check that, when the burner is stopped, the air-breathings do not draw
warm smokes from pipes through the burner.
THE INSTALLATION AND THE MAINTENANCE OF THE BURNER MUST BE CARRIED
OUT ACCORDING TO THE REGULATIONS IN FORCE, CONCERNING THE HABITATIONS
AND THE PUBLIC BUILDINGS.

Other manuals for Riello 40 FS20

Related product manuals