Riello BAG3 MIX BASIC - English

16
ENGLISH
RANGE
MODEL CODE
BAG
3
MIX BASIC 20082286
BAG
3
2 MIX BASIC 20082288
ACCESSORIES
Please refer to the Riello price list and the product information
sheet for the specic accessories.
TABLE OF CONTENTS
In some parts of the manual, the following symbols are used:
9
= for actions which require particular precautions and
adequate preparation
0
= for actions which MUST NOT be performed
Dear Customer
Thank you for having chosen the BAG
3
, an innovative, modern
product, of a high quality and able to ensure the utmost comfort
reliably and safely; this is particularly the case if the BAG
3
and
the boiler to which it is connected are entrusted to the r
Technical Assistance Service, whose technicians have been spe-
cically trained to carry out routine maintenance, in order to
keep it at the highest level of efciency, with lower operating
costs and who can provide original spare parts if and when re-
quired.
This instruction manual contains important information and
suggestions which must be observed in order for installation
to be as simple as possible and for the best possible use to be
made of the BAG
3
.
Thank you once again
Riello S.p.A.
CONFORMITY
The BAG
3
conforms to:
− Electromagnetic Compatibility (EMC) Directive 2004/108/EC
− Low Voltage Directive 2006/95/EC
FOR THE USER
0
INSTRUCTIONS FOR THE USER this device does not require any
adjustment or checks to be carried out by the user. Opening
the front cover of the device is therefore strictly prohibited.
9
Regularly check the water pressure in the system and restore
if necessary following indications provided in the instruction
manual. If the pressure should fall frequently, request the
intervention of a qualied technician to check the system.
1 GENERAL..........................................17
1.1 General instructions .........................17
1.2 Basic safety rules............................17
1.3 Description of the appliance . . . . . . . . . . . . . . . . . . . 17
1.4 Structure ..................................18
1.5 Identication ..............................18
1.6 Technical data..............................19
1.7 Plumbing connections .......................19
1.8 Circulation units ............................20
1.9 Wiring diagram .............................21
1.9.1 BAG
3
2 MIX BASIC wiring diagram ................21
1.9.2 BAG
3
MIX CLIMA wiring diagram .................22
2 INSTALLATION ..................................... 23
2.1 Receiving the product ........................23
2.2 Dimensions and weights......................23
2.3 Installation inside the box.....................23
2.4 Minimum distances .........................25
2.5 Typical installation layout .....................25
2.6 Electrical connections . . . . . . . . . . . . . . . . . . . . . . . .26
3 COMMISSIONING...................................27
3.1 First start-up...............................27
3.2 Setting the circulation units ...................27
3.3 Setting the low temperature system .............29
3.4 Setting the high temperature system ............29
3.5 Checks after commissioning ...................29
4 MAINTENANCE..................................... 29
4.1 Cleaning ..................................29
4.2 Draining the BAG............................29
4.3 Checking the circulation units ..................29
4.4 Checking the mixing valves ....................29