Riello BAG3 MIX BASIC - Structure; Identification

18
GENERAL
ENGLISH
1
2
1.4 Structure
1.5 Identication
BAG
3
can be identied by:
− Packing label (1)
− Technical Data Plate (2) with the technical data.
9
Tampering, removing, failure to display
the Technical Data Plate or any other in-
tervention which does not permit relia-
ble identication of the product, makes
any installation or maintenance inter-
vention difcult.
1
3
2
4
5
6
7
12
13
BAG
3
2 MIX BASIC
BAG
3
MIX BASIC
8
8
9
10
11
12
14
13
1
3
2
4
5
6
7
1 Drain cock
2 Mixing bottle
3 Circulation unit low temperature system 1
4 Circulation unit high temperature system
5 Non-return valve (inside the pipe)
6 Mixing valve low temperature system 1
7 Air vent valve
8 Thermometer low temperature system 1
9 Thermometer low temperature system 2
10 Mixing valve low temperature system 2
11 Circulation unit low temperature system 2
12 Electrical connection box
13 Automatic rearming limit thermostat
low temperature system 1
14 Automatic rearming limit thermostat
low temperature system 2