Riello F3 User Manual

C6501010 STANDARD F3-5 MANUAL Rev. 3-2 10/12/2006
1
MODEL F3 & F5
INSTALLATION
MANUAL
RIELLO 40
SERIES
RESIDENTIAL
OIL BURNERS
NOTE: The settings in this manual are for retrofit applications. If this burner is being installed on a packaged
unit (burner comes with the boiler or furnace), then follow the settings on the OEM page, as settings may
differ. Burner is set for a single line system.

Riello F3 Specifications

General

Brand	Riello
Model	F3
Category	Burner
Language	English

Summary

INITIAL SET-UP

MOUNTING THE BURNER TO THE BOILER OR FURNACE

METHOD 1 – UNIVERSAL MOUNTING FLANGE

METHOD 2 – SEMI-FLANGE COLLAR

METHOD 3 – PEDESTAL MOUNT

ELECTRICAL CONNECTIONS

APPLICATION FIELD WIRING

NOZZLE PLACEMENT

ELECTRODE SETTING

TURBULATOR SETTING

OIL LINE CONNECTIONS

PUMP PURGE

SINGLE LINE (GRAVITY FEED SYSTEM)

Procedure for purging the pump in a single line (gravity feed) system.

TWO LINE (LIFT SYSTEM)

Procedure for purging the pump in a two-line (lift) system.

SETTING THE AIR ADJUSTMENT PLATE

BURNER ADJUSTMENT TABLES

MODEL F3 BURNER SETUP CHART

Provides firing rates, nozzle sizes, pressures, and settings for Model F3.

MODEL F5 BURNER SETUP CHART

INSTALLATION PRECAUTIONS

Air Supply and Chimney Requirements

Oil Filter and Draft Management

Electrical Connection Standards